HSE-INSIDER a fast growing HSE Networks operated by HSE Professionals for the HSE family to provide information's on HSE Standards, Safety Articles, Safety Interview Q & A, Job Vacancies across the globe, HSE Books and Lots of HSE Information’s.....
Work in
confined spaces can be dangerous. You need to be aware of the risks and know
how to prevent them. Work in confined spaces can kill or cause injuries in any
industries/organization, ranging from those involving complex plant/process
system through to simple storage. Those victims include not only people working
in the confined space but also those who try to rescue them without proper
training and equipment.
Safety at construction
site is an part of construction-related actions concerned with safe guarding
construction site employees and others from injury, occupational disease or
other health-related risks.
Process
industries are more complex and have more hazards than the normal industries,
Most of the process related incidents are catastrophic, many have the
possibility of causing significant injury, property and environmental damage, and
heavy business impact. The following incidents provide examples for large companies
happened around the world.
On startup
of the methomyl process, which is used to make insecticides, a runaway reaction
occurred inside a 4500-gallon pressure vessel that exploded killing two workers
and injuring eight. Many roads were closed and 40,000 people in the surrounding
areas were asked to shelter-in-place as a precaution. The incident
investigation report stating that many safety deviations resulted into this
incident. The U.S. Chemical Safety Board (CSB) report concluded that written
startup procedures were not followed, safety devices were bypassed, and many
other factors contributed to the incident. Fortunately, a nearby tank
containing a highly toxic material, methyl isocyanate (MIC), was not damaged by
the explosion or the incident may have been worse. This incident resulted into
the loss of life and a huge investment. The methomyl process was not operating,
and $80 million was invested to improve the safety of MIC storage and handling,
although the company decided to shutdown the use of MIC at the facility before
startup.
Dust
explosion in the process industry is highly dangerous with respect to human
safety and equipment damage & environmental concerns. This sugar refinery
processed raw cane sugar into granulated sugar. Conveyers and elevators were
used to transport sugar through the plant and to large storage silos. An initial
dust explosion occurred in a conveyer near the storage silos that dispersed
additional sugar dust into the air, leading to secondary dust explosions and
fires throughout the facility. Fourteen people were killed, 36 were injured,
and the facility was severely damaged. U.S. Chemical Safety Board (CSB)
concluded that equipment design and housekeeping practices allowed sugar dust
to accumulate that led to the explosions.
One of the
major incident in India, A pesticide plant was not operating, but a large
release of highly toxic methyl isocyanate (MIC) occurred from storage that
resulted in many fatalities and injuries in the nearby community in the middle
of the night. Water was introduced into a storage tank containing MIC that led
to a runaway reaction and subsequent venting of MIC from the tank. Many
safeguards at the site, including tank refrigeration, instrumentation,
scrubber, and process flare, were shut down or not operating. The lack in
safety awareness on the MIC also a leading factor for the more casualties.
This
incident is one big in the oil & gas industry, Piper Alpha was a large oil
platform in the North Sea. After the accidental release of flammable hydrocarbons,
a series of explosions and fires occurred that led to total destruction of the
platform, 167 fatalities, and a property loss of $1.5 billion. The
investigation of the catastrophe determined that a primary cause of the event
was a faulty work permit system that separated the work permits for a
condensate pump and its associated relief valve, allowing the pump to be
inadvertently started up with the relief valve still out-of-service. The
ineffective permit to work / work permit system resulted into the loss of many
lives and huge property damage.
Cold related
injuries also be looked into serious as heat related safety concerns, for the
cold injuries it is to prioritize and limit our outside work during low temperature
and wind chill extremes, and to use the correct PPE for any outside work.
Pay special
consideration to protection of the face & head, hands, wrists, and feet.
Gloves with gauntlets should be used to prevent exposed skin areas between the
jacket and gloves.
Hypothermia
Hypothermia
is one of the serious health concern bcz of the cold temperature, it will lower
the body core temperature to the point where it is no longer functioning
properly. Hypothermia symptoms include intense shivering, poor coordination,
stumbling, loss of memory, thickness of speech and drowsiness.
Hypothermia
is insidious, and left untreated, may result in collapse and sometimes death.
Employees to be very careful, Dehydration, or the loss of body fluids, occurs
gradually in the cold environment and may raise the susceptibility of workers
to cold injury due to a significant change in blood flow to the extremities. During
cold climates, Warm, sweet drinks and soups should be taken to the work site to
provide caloric intake and fluid volume. Employees with a cold, or flu, or
certain diseases, such as diabetes, heart, vascular, and thyroid problems may
be more susceptible to the cold/winter elements.
Becoming exhausted or immobilized, especially due to injury can speed up the
effects of cold weather. It is important to note that most hypothermia cases
are reported
during cool weather conditions.
Prevent
further heat loss, contact emergency services, and transport as soon as
possible as directed to a medical facility.
Frostbite
Frostbite
is very dangerous, its freezing the body tissue. It may range from minor injury
(“frost nip”) to complete freezing of an extremity. Untreated frostbitten areas
will first become reddened, and then become gray or white, particularly on
exposed ear lobes, cheeks, or nose. Left untreated, the skin becomes numb and dead
white. Watch co-workers for signs of frostbite.
Treatment
Transport
as soon as possible to a medical facility.
Steam is one of the major utility source in industry and it is used for various purposes. Each cleaning or purging application utilizing steam to eliminate a process equipment flammable atmosphere will require a written specific job plan that is reviewed by a Engineer and
Safety office. These plans at a minimum must address the requirements outlined
in the Tank / Vessel / Piping Preparation and Cleaning Procedure and the
following considerations.
General
Safety Requirements
PPE
considerations need to be assessed to protect employees from burns from hot
surfaces or contact with steam, it to be the last line defense. The exiting
steam and waste can form an ignitable mixture once it combines with the outside
air. It is important to eliminate ignition sources near the tank / pipe /
vessel such as vehicles, heaters, etc. and monitor the wind direction. Place
the caution signages to alert the people. The steam plume exiting a vessel,
tank or pipe can contain high level of hydrocarbons including benzene. Caution
must be used to ensure that employees, offices, or air intakes are not in the
path of the plume. Always place barricades and or visible signs as needed.
Employees to be trained in the emergency preparedness and evacuation. Safety
shower and eye wash provisions to be provided.
Contraction
and expansion must be considered for all types of equipment and coatings due to
rapid temperature changes. This can affect tanks, vessels, or pipelines. The way
equipment is secured and allowed to move must also be considered. This is
especially true when using both steam and nitrogen to purge systems. Ensure
that the steam nozzle and tank/vessel are bonded together and grounded to
prevent static discharge during operations. Follow all energy isolation
procedures to prepare the equipment for cleaning or purging.
Environmental
Considerations
All solid
and liquid waste streams should be managed and disposed of in accordance with
the local government guidelines. Some waste streams may require sampling and
lab analyses to determine the proper disposal option. Environmental should be
contacted prior to generation of wastes. Appropriate spill prevention
procedures should be developed and implemented prior to any steaming operation.
All spills must be reported per defined procedures. The force of the exiting
steam may produce misting containing hydrocarbon residue. Necessities for mist
containment must be considered:
If a tank
is to be steamed it must be determined if the tank is a double walled tank. It
is critical that there be a vent between the inner and outer wall of the tank.
Usually this vent is
located on the upper outer wall of the tank. If no vent is located on the tank,
steaming cannot be performed as severe damage to the tank could result. If it
is deemed that repairs to the tank walls need to be preformed additional atmospheric
testing must be done inside the tank and in the space between the inner and
outer wall, all confined space safety requirements must be ensured.
Ventilation
is very important in confined space for the safe work. Mechanical ventilation
(e.g., air movers) in confined space shall be used to ensure the removal of all
hazardous airborne contaminants where a hazardous atmosphere exists or could
develop during the course of planned work (painting, welding, gas cutting
etc.).
Mechanical
Ventilation - If the confined space is within process equipment or where
combustible or flammable material may be present, mechanical ventilation shall
be used during the entire period of occupancy, even if gas testing indicates no
hazardous concentrations inside the space.
Venting -
Flammable/toxic gases or vapors vented from a confined space shall be removed
in such a manner that the venting does not pose a risk to employees, equipment,
or operations. Precautions shall be taken to eliminate potential sources of
ignition in areas where flammable gases or vapors are vented.
Procedure
for mechanical ventilation - Where practical, mechanical ventilation shall
provide air blowing into the bottom or lower portion of the confined space and
exhaust out the top or upper portion of the space.
Air
Contaminants - Blowers or other means of introducing air into a confined space
shall be placed so as to minimize the possibility of introducing air
contaminants (e.g., CO).
Bonding of
Electrical Equipment’s - All electrical and static-producing equipment,
including air movers, shall be properly grounded and bonded to the vessel/tank
(if applicable).
Mechanical
ventilation/cooling shall be directed at the immediate areas where persons are
working within the confined space and shall continue until all person(s) have
left the space.
For some
jobs like welding, grit blasting, spray painting, etc., additional ventilation
may be necessary to sufficiently reduce the accumulation of hazardous vapor,
mist or particulates. Local exhaust ventilation may also be required for such
jobs when the internal configuration of the confined space impedes air
circulation.
Never Use -
Plant air or engine-driven compressed air shall never be used for mechanical
ventilation.
Natural
Ventilation - In lieu of mechanical ventilation, natural ventilation may be
used as the source of ventilation in a confined space only if there is no potential
for the development of a hazardous atmosphere. Examples of such locations
include entries into open excavations or structures, diked areas surrounding
tanks, etc.